SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
Lockplate Assembly - Left Side - w/o Hammer - Original - This Remington manufactured left side lockplate assembly is complete except for the hammer and hammer screw and is in very good condition exhibiting a brownish gray patina with some scattered specks.
Carries the most popular assembled fastener plates, including a range of assembled 2 fasteners with varying screw types, masonry fasteners, Long-lock fasteners (drill bit included), and assembled ULP-302 fasteners.A bit of grease, used during assembly; Screwdrivers appropriate for each screw; Nylon hammer, for reassembling the hammer to the lock; Use good quality tools, in excellent condition. Rounded or jagged edges on the screwdriver blade, or dings and ridges on hammer or vice face may mar or distort parts.
- timken SNP-3164 x 11 15/16 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- Cast Steel
- 1.5 Inch | 38.1 Mill
- timken SNP-3168 x 12 7/8 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- Polyamide
- 2.165 Inch | 55 Mill
- timken SNP-3160 x 10 15/16 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- Bearing
- Sleeve Bearings
- timken SNP-3156 x 10 7/16 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- 4.26
- 0 Inch | 0 Millimete
- timken SNP-3156 x 10 1/2 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- 0644075272605
- CONSOLIDATED BEARING