SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
Lockplate Assembly - Left Side - w/o Hammer - Original - This Remington manufactured left side lockplate assembly is complete except for the hammer and hammer screw and is in very good condition exhibiting a brownish gray patina with some scattered specks.
Carries the most popular assembled fastener plates, including a range of assembled 2 fasteners with varying screw types, masonry fasteners, Long-lock fasteners (drill bit included), and assembled ULP-302 fasteners.A bit of grease, used during assembly; Screwdrivers appropriate for each screw; Nylon hammer, for reassembling the hammer to the lock; Use good quality tools, in excellent condition. Rounded or jagged edges on the screwdriver blade, or dings and ridges on hammer or vice face may mar or distort parts.
- timken SNP-31/500 x 18 7/16 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- Eccentric Collar
- 0.551 Inch | 14 Mill
- timken SNP-3192 x 17 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- 185.0
- Insert Bearings Cyli
- timken SNP-3180 x 15 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- 0 Inch | 0 Millimete
- 15.89
- timken SNP-3176 x 13 15/16 SNW/SNP-Pull-Type Sleeve, Locknut, Lockwasher/Lockplate Assemblies
- B04144
- Roller Assembly Only