Single row angular contact ball bearings
Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load.
Single-row The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.Angular Contact Bearings feature raceways with high and low shoulders. These opposing raceways are designed to accommodate axial loads in one direction in addition to radial loads. Self-retaining units with solid inner and outer rings and ball and cage assemblies.
- 100 mm x 180 mm x 34 mm skf 7220 BEGAM Single row angular contact ball bearings
- Sleeve Bearings
- 130MM Nominal Bore;
- 45 mm x 85 mm x 19 mm skf 7209 ACCBM Single row angular contact ball bearings
- Yes (with retaining
- 47
- 70 mm x 150 mm x 35 mm skf 7314 ACCBM Single row angular contact ball bearings
- 360
- 70 mm x 150 mm x 35 mm
- 762 mm x 889 mm x 63.5 mm skf BA1B 311576 Single row angular contact ball bearings
- 762 mm x 889 mm x 63.5 mm
- 2900 r/min