Single row tapered roller bearings
Single row tapered roller bearings SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation.Our single row tapered roller bearings are designed and manufactured to handle both axial and radial loads. The standard Cage for American Tapered Roller Bearings is a “pin-type” design that has proven to be very successful in applications that experience very high loads and high speeds. No suffix is used on our bearing number for this cage, while other types of cages have their own suffix code when used.
Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used around the world. These roller bearings consist of an Outer Race, Bronze or Steel Cage, a complement of rollers, and usually an Inner Race. Our single row cylindrical roller bearings are available in ISO and ABMA series.
- NTN 4T-18720 Single row tapered roller bearings
- Yes
- 0.7500 in
- NTN 4T-18790 Single row tapered roller bearings
- 34 mm
- 16 mm
- NTN 4T-18690 Single row tapered roller bearings
- 120 mm
- 109 mm
- NTN 4T-18685 Single row tapered roller bearings
- 4 Bolt Pillow Block
- Non-Expansion
- NTN 4T-18620 Single row tapered roller bearings
- 7.88 kN
- 1/4-28UNF
- NTN 4T-18590 Single row tapered roller bearings
- 40 mm
- 101 mm