Single row angular contact ball bearings
Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load.
Single-row The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.Angular Contact Bearings feature raceways with high and low shoulders. These opposing raceways are designed to accommodate axial loads in one direction in addition to radial loads. Self-retaining units with solid inner and outer rings and ball and cage assemblies.
- 15 mm x 42 mm x 13 mm skf 7302 BE-2RZP Single row angular contact ball bearings
- 15 mm x 42 mm x 13 mm
- 110,000
- 50 mm x 110 mm x 27 mm skf 7310 BECAM Single row angular contact ball bearings
- Steel
- With Outer Ring
- 55 mm x 100 mm x 21 mm skf 7211 BECBM Single row angular contact ball bearings
- 698
- Flanged Pilot Type
- 75 mm x 130 mm x 25 mm skf 7215 BEGAM Single row angular contact ball bearings
- Deep Groove Ball Bea
- Double
- 55 mm x 100 mm x 21 mm skf 7211 BECBP Single row angular contact ball bearings
- 15 ° / Angle
- 0,645 kg / Weight