Single row angular contact ball bearings
Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load.
Single-row The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.Angular Contact Bearings feature raceways with high and low shoulders. These opposing raceways are designed to accommodate axial loads in one direction in addition to radial loads. Self-retaining units with solid inner and outer rings and ball and cage assemblies.
- 75 mm x 130 mm x 25 mm skf 7215 BECBY Single row angular contact ball bearings
- Standard
- Bearing unit
- 55 mm x 140 mm x 33 mm skf 7411 BCBM Single row angular contact ball bearings
- 0,2238 Kg
- 15,875 mm
- 80 mm x 200 mm x 48 mm skf 7416 CBM Single row angular contact ball bearings
- 25577/25521
- 23.812
- 80 mm x 170 mm x 39 mm skf 7316 BEGAP Single row angular contact ball bearings
- 80 mm x 170 mm x 39 mm
- NSK